Service Disabled Veteran Owned Small Business(SDVOSB)

Klas Telecom

Back To Solutions

KlasTelecom_Logo_CMYK (5)_cropped




4K Solutions is an authorized Klas Telecom reseller.

Klas Telecom Voyager networking system “Voyager” are a family of modular and scalable design that provide the smallest, deployable man pack and command post networking packages on the market.




The VoyagerECK (Executive Communications Kit) provides VoSIP and multi-enclave data capability in a small, portable, lightweight package. With its built-in cellular and Wi-Fi transport options, the VoyagerECK solution enables global access to secure network resources even when a user is on the move. Furthermore, VoyagerECK is easy to use with an average set up time of less than three minutes. VoyagerECK also meets a bring-your-own-device (BYOD) requirement by allowing users to utilize their existing laptop computer.


sw14Voyager is a modular, scalable architecture for executive and tactical communications teams encompassing a range of network modules, which can be used with a number of chassis options. The Voyager system enables communication teams to share secure information both statically and on the move in any operational environment. The extensive network module range allows customization based on mission demands and optimized size, weight, and power (SWaP).




Voyager m-Series Modules

The Voyager product line was designed to provide scalable network communications from a single user to a headquarters or command post installation using common modules wherever possible. Prior to the introduction of Voyager m-Series modules, this sometimes meant that elements of a solution had more features and port density than required.  Voyager m-Series modules allow increased customization of features in baseband packages without a corresponding increase in system size. These smaller modules also enable use of advanced Voyager networking capabilities on deployment platforms where larger Voyager modules are less practical.

Rather than designing a new form factor, Klas Telecom created modules that are half the height of the existing Voyager modules and designed them to slide in and out of the VoyagerECK. When removed from VoyagerECK, the Voyager m-Series modules can be combined for use with other chassis in the Voyager product range, such as Voyager 1, 2, 8 and VoyagerExpress.

Now more than ever, Voyager enables customers to communicate more, and carry less.


Key Features

  • Easy access to VoSIP handset dedicated door for voice calls even while on-the-move
  • Data ports accessible through separate access doors
  • Removal of Voyager Ignition Key (VIK) renders the device inoperable for additional security
  • VIK allows persona portability among systems and enables rapid reconfiguration by an incidental operator
  • Carbon fiber structure provides lightweight but robust construction
  • Half the size of Klas Telecom’s Executive Voice Kit (EVK)


 Primary Components

  • Cisco routing on black enclave supporting IOS 15.3
  • Layer 2 managed switch on red enclave supporting 802.1x, IGMP, MSTP, SNMP, DHCP
  • Support for GFE ViaSat KG-250X HAIPE
  • VoIP handset for red enclave
  • Power supply and internal battery

Black Enclave

  • 1 x Cisco 5915 ESR
    • 2 Ethernet 10/100 switch ports (FE 0/3, FE 0/4), 1 PoE enabled port
    • 1 Ethernet 10/100 routed port for Ethernet uplink (FE 0/1)
    • 1  Ethernet 10/100 routed port for Wi-Fi/Cellular uplink (FE 0/1)
    • Internal connection to ViaSat KG-250X CT (FE 0/2)
    • 1 Console port
  • Cradlepoint IBR600 3G/4G/Wi-Fi router
    • Fully integrated Router/Bridge
    • Integrated 3G/4G modem
    • Certified for shock and vibration in accordance with MIL-STD-810G and SAE J1455
    • External 3G/4G and Wi-Fi antennas
    • Ethernet Ports connected to Cisco 5915 ESR internally
    • (LAN/LAN or WAN/LAN)
    • WiFi 802.11 with Full Security
    • AT&T, Verizon, Sprint and International modem variants
  • General
    • Rotary power switch with 4 positions:  OFF / ON Blackout/ ON / ON Zeroize / operation

Red Enclave

  • 1 x KlasOS 4 Layer 2 switch with ports:
    • 4 Ethernet 10/100 switch ports (FE 1/0 – 1/3). All PoE enabled
    • 1 Ethernet 10/100/1000 switch ports (Gb1)
    • 1 Ethernet 10/100/1000  switch port routed to KG-250X PT (Gb0)
    • 1 FXS VoIP port
    • 2 USB 2.0 ports for connection to E&M or synchronous serial device
    • 1 USB 3.0 port
    • 1 Console port
    • 1 Voyager Ignition Key (VIK) interface
  • KlasOS 4 features
    • STIG compliant Layer 2 switch
    • IEEE 802.1x Port-based Network Access Control
    • IEEE 802.1Q VLANs
    • Static & dynamic Port Security
    • Spanning Tree Protocol
    • SNMP v3
    • IGMP snooping
    • Port mirroring
    • DHCP server
  • General
    • Rotary power switch with 4 modes: OFF / ON Blackout/ ON/ ON Zeroize / operation

VoyagerECK Physical Specification

  • 14.7” L x 8.9” W x 3.3” H (373 x 226 x 83mm)
  • 9.2lbs / 4.1kg (no KG-250X)
  • 12 lb / 5.4kg (with KG-250X)
  • IP65 ingress protection
  • MIL-STD-810G compliant

VoyagerECK Power Specification

  • 10-36 VDC Input range
  • Supports charging from automobile supply
  • 2 hour internal battery power for all components
  • PoE on red enclave to support a broad range of VoIP devices

Environmental Specification


  • Operating temperature: -10 °C to +55 °C
  • Storage temperature: -20 °C to +70 °C

Certification and Approvals

  • Approved to operate on DISA’s DoD Enterprise Classified Travel Kit Gateway (DECTK-GW)
  • Listed on the DISA UC APL and JITC approved
  • Red Dot Award for Product Design

Get A Quote

Back To Solutions